Episode E-2100 Guide de l'utilisateur télécharger pdf (Page 64)

56 Troubleshooting

I am unable to get out of the MENU . . . . . . . . . . . . 59

No picture through RF loop out to my Television . . . . 59

My Topﬁeld recorder doesn’t go to standby after instant

recording (non timer recording) . . . . . . . . . . . 59

Cannot view guide content . . . . . . . . . . . . . . . . . 59

Before you call a repair person for your Topﬁeld product, check

the list of possible problems and solutions.

No power / No front display

• Make sure the main switch on the back of Topﬁeld is

switched to ON.

• Properly insert the power plug into the power socket.

• If the power outlet is controlled by a switch, make sure

the wall switch is ON.

• Remove the power plug from the wall and wait 10 sec-

onds, then plug back in.

• Plug another appliance into the outlet, if the other appli-

ance doesn’t work then have a qualiﬁed electrician repair

the outlet.

• Plug the Topﬁeld into a diﬀerent outlet.

I have connected my Topﬁeld and get no picture on the Television

• Check that you have connected the cables from the Top-

ﬁeld to the TV

• The connection must be via an AV output out of the Top-

ﬁeld to an AV input of the TV.

• Check that you are in the correct AV setting on the TV.

For example if you connected the Topﬁeld box to AV2 on

the TV make sure you set your TV with the TV remote to

AV2 before the Topﬁeld can be used.

• Press the









V.Format button on the remote and set to the

correct resolution.

576i/576p/720/1080i/AUTO. You may need to press the

1 2 ... 59 60 61 62 63 64 65 66 67 68

Pas de commentaire

Episode E-2100 Guide de l'utilisateur Page 64